YG-1 Solid Carbide Drills, Dream Drill For High Hardened Steel (HRc50~HRc70) 4xD, DH500065, D=6.5 L=80
| EDP No. | D1 | D2 | L1 | L2 | Drilling Depth |
| DH500065 | 6.5 | 8 | 40 | 80 | 4xD |
(Unit : mm)
Feature
- Application : Drilling for High Hardened Steels[Quenched Steels, Tempered Steels (Under HRc 70)
- Advantage : Special Design
- Minimum of cutting load through special thinning Good chip removal Powerful Drilling
DREAM DRILLS
for HIGH HARDENED STEELS
Low Helix
The low Helix angle maximizes tools’ rigidity and stability with less deflection
Special Thinning (R+U Thinning)
Unique drill point geometry with special thinning to minimize cutting workload, axial thrust loading and heat generation
Coating
TiAlN nano coating combines high hardness with high thermal stability against oxidation, allows machining the upper level of hardened steels HRc 50-70.
Polished Flutes
Polished flutes improve coating addition, with better chip control and evacuation.
Work Material
| ISO | VDI 3323 |
Material Description |
Composition / Structure / Heat Treatment | HB | HR | ◎ : Excellent ○ : Good |
| P | 1 | Non-alloy steel | About 0.15% C Annealed | 125 | ||
| 2 | About 0.45% C Annealed | 190 | 13 | |||
| 3 | About 0.45% C Quenched & Tempered | 250 | 25 | |||
| 4 | About 0.75% C Annealed | 270 | 28 | |||
| 5 | About 0.75% C Quenched & Tempered | 300 | 32 | |||
| 6 | Low alloy steel | Annealed | 180 | 10 | ||
| 7 | Quenched & Tempered | 275 | 29 | |||
| 8 | Quenched & Tempered | 300 | 32 | |||
| 9 | Quenched & Tempered | 350 | 38 | |||
| 10 | High alloyed steel, and tool steel |
Annealed | 200 | 15 | ||
| 11 | Quenched & Tempered | 325 | 35 | |||
| M | 12 | Stainless steel | Ferritic / Martensitic Annealed | 200 | 15 | |
| 13 | Martensitic Quenched & Tempered | 240 | 23 | |||
| 14 | Austenitic | 180 | 10 | |||
| K | 15 | Grey cast iron | Pearlitic / ferritic | 180 | 10 | |
| 16 | Pearlitic (Martensitic) | 260 | 26 | |||
| 17 | Nodular cast iron | Ferritic | 160 | 3 | ||
| 18 | Pearlitic | 250 | 25 | |||
| 19 | Malleable cast iron | Ferritic | 130 | |||
| 20 | Pearlitic | 230 | 21 | |||
| N | 21 | Aluminum wrought alloy |
Not Curable | 60 | ||
| 22 | Curable Hardened | 100 | ||||
| 23 | Aluminum-cast, alloyed |
≤ 12% Si, Not Curable | 75 | |||
| 24 | ≤ 12% Si, Curable Hardened | 90 | ||||
| 25 | > 12% Si, Not Curabl | 130 | ||||
| 26 | Copper and Copper Alloys (Bronze / Brass) |
Cutting Alloys, PB>1% | 110 | |||
| 27 | CuZn, CuSnZn (Brass) | 90 | ||||
| 28 | CuSn, lead-free copper and electrolytic copper | 100 | ||||
| 29 | Non Metallic Materials |
Duroplastic, Fiber Reinforced Plastic | ||||
| 30 | Rubber, Wood, etc. | |||||
| S | 31 | Heat Resistant Super Alloys |
Fe Based Annealed | 200 | 15 | |
| 32 | Fe Based Cured | 280 | 30 | |||
| 33 | Ni or Co Based Annealed | 250 | 25 | |||
| 34 | Ni or Co Based Cured | 350 | 38 | |||
| 35 | Ni or Co Based Cast | 320 | 34 | |||
| 36 | Titanium Alloys |
Pure Titanium | 400 Rm | |||
| 37 | Alpha + Beta Alloys Hardened | 10500 Rm | ||||
| H | 38 | Hardened steel | Hardened | 550 | 55 | ◎ |
| 39 | Hardened | 630 | 60 | ◎ | ||
| 40 | Chilled Cast Iron | Cast | 400 | 42 | ||
| 41 | Hardened Cast Iron | Hardened | 550 | 55 |
